Mikrotik radius server ip address. RADIUS server port used for authentication.

Mikrotik radius server ip address. 0 at two attributes; .

• Mikrotik radius server ip address . I configured Microsoft NPS as a RADIUS server. If you are going to dish out private IP 's then you will have a source nat or masquerade from that range to the WAN IP. certificate (string; Default: ) Certificate file to use for communicating If you are using the radius server in MT ROS as part of Usermanager, then the IP address should be, and only be, 127. I want redirect all traffic from an ip address to a web address. I still have a problem with RADIUS. I experience the following issue: When I return Access-Accept with Framed-IP-Address attribute, the DHCP Server does not return the correct IP Setting. keep mikrotik ips as 192. In my situation, I want my Mikrotik router to talk to a radius server with no static ip. Go to MikroTik download section and select your MikroTik RouterOS version and download all packages zip file that will match with your Architecture Name (all_packages I will suggest you to setup your radius server on a different ip. Hello, I have some questions in aim to have a radius server with some specific attributs for customer. 11. 0 Router(config-if)#ip address 192. You can then assign the same FQDN in DNS to multiple IP's which will result in a round-robin load balancing of authentication traffic. Value depends on Point-to-Point protocol: PPPoE - service name, PPTP - server's IP address, L2TP - server's IP address. Step 3 - add a new router in Splynx Now we need to add: I'll be honest. 1" same as mnasir posted above (local host which mean your Winbox Router) Userman (Router -> IP Address) Winbox (Radius -> Address, and must check on "hotspot" I didn't saw your image on this setting then don't sure you did check on hotspot or not) 1. 252) before the MikroTik User Manager RADIUS Server is a centralized user authentication and accounting application that can be used to mange PPP, Hostspot and RouterOS users. 0 at two attributes; The RADIUS server is not responding. Post your User Manager and RADIUS client configuration. But the devices do not get an IP address radius (nas server) only handles AAA (users and password, mac addresses etc - as defined in attributes) requested by routers (nas clients) . These are not MAC-based however (on IP-address), and far from automatic. Packet capturing on port 67 or I am upgrading a router from STar-os to MT. If I use the traceroute tool in ROS and specify radius server IP and udp 1812 I can see the traffic on the radius server interface. The issue is that the management IP address is as many as there’re IPs per VLAN. If Yea, pulls the next available IP from centralized pools, tells the BRAS to let the user on and assign it the new address. In the meantime, are there any entries that I should remove from the Mikrotik as a matter of process when I transfer a user from the Hotspot-->Users section to my external radius server to help ensure that the subscriber will experience little I have tested the IPV6 in Mikrotik with Radius,Please see the below testing result :-1. 20. Enter IP Address of IAS RADIUS server. since my dhcp-server is a mikrotik-device too, I used the radius-accounting function of When i press login button the message i have is "Radius server is not responding". 0 at two attributes; Here you choose wireless and under address you enter your RADIUS server IP address and secret is password for the server. In the CLI, it won't show, and shows "none" in Winbox. do you have a running Radius server on the mikrotik device, and did you double check the ports (mikrotik radius is not on port 1812 by default) ? Parameter Description hotspot interface (string; Default: allow) Interface name on which to run HotSpot. 1, problem with radius server not responding start. 4 and all was working very well include radius server (usermanager) When update to Version 6. My RADIUS server is on Head Office - 172. making IPsec/IKEv2 EAP+radius. There are Radius and Dhcp servers and wired and wireless (Wi-fi) supplicants (clients) . again, did u enable dhcp server for the hotspot client cus at times it happnes when the client is not getting an ip address or in your hotspot, login to winbox, and click on server profile, then the hotspot u created Clients are assigned to the address list, which are then used in PCQ setup. conf file; service - set to service which to use particular RADIUS server for, the same server can be used for multiple services if needed. sorry, this is the first time doing thiscan you point # Attributes are supported by MikroTik RouterOS. It is also possible to hand out leases for DHCP clients using the RADIUS server, here are listed the parameters for used in RADIUS server. Do not forget /ip hotspot user is used at the first point and only then Hello, I have VPN L2TP domain users which are authenticated by Windows Server 2012 NPS (Radius), so I don't have profiles for them created in Microtik but these users are in Windows Security Group then this group have access to Specified IP Pool from Mikrotik. 1/32 Change this ip to all relevant sections and you must be ok We implemented all except dhcp server. The internal radius server is listening on that interface, so it should work fine on 127. 9 -> FreeRADIUS -> OpenLDAP. The MikroTik RouterOS has a RADIUS client that can authenticate for PPP, PPPoE, PPTP, L2TP, OPVN, and ISDN connections. I have also read that you should use 127. You are welcome. The ip pool for the hand out can be in a mikrotik pool or in the radius server there are two ways to do it. 1. I had the issue that I could not connect to the user manager web interface on Hi, I would like to use the user manager to distribute the IP addresses via DHCP. There is no bridge. (The radius server sends to MT the ip address of client) This is functionally, but when primary radius server fails and MT uses secondary server, this(MT) sends an Here you choose wireless and under address you enter your RADIUS server IP address and secret is password for the server. But i can see the requests in the status of radius. 10. do you have a running Radius server on the mikrotik device, and did you double check the ports (mikrotik radius is not on port 1812 by default) ? same problem tried to setup radius-sso for wireless-users in my firewall but without radius-attribute <Framed-IP-Address>, the user-status is not established. /interface bridge add name=bridge1_hotspot /interface wireless security-profiles set [ find default=yes ] supplicant-identity=MikroTik /ip hotspot profile add dns Jika pada implementasi real, ketika router UserManager terpisah dengan router DHCP/Wireless, IP address Anda isi dengan IP Address router yang menjalankan service UserManager. The original ip issued by my dhcp server shows in "/ip hotspot host" as the address, but the to-address shows the ip I sent with Framed-IP-Address for that user. 65535]; Default: 1812) RADIUS server port used for authentication. Any help greatly appreciated. 1/24) HotSpot radius (nas server) only handles AAA (users and password, mac addresses etc - as defined in attributes) requested by routers (nas clients) . 100. same problem tried to setup radius-sso for wireless-users in my firewall but without radius-attribute <Framed-IP-Address>, the user-status is not established. Idea is to lease ip address from dhcp server based on Thanks! Hi all, I am trying to setup Mikrotik as a PPTP VPN concentrator. I didn't see a way to set the accounting server ip address to point to (4) watchguard firewall and (2) being the mikrotik radius server. Jangan lupa di setting DHCP Server, centang opsi Here you choose wireless and under address you enter your RADIUS server IP address and secret is password for the server. I cannot get user manager to work. Use port 1812 for Authentication and 1813 for Hello, I need to build a secured Hotel network using mikrotik devices. Make sure that you've provisioned this remote client in userman. 2/24) also change the ethernet of ip address u have configured to connect radius server. 1/24 & radius server 192. Radius server is pingable, service is up. " message), But local users of Hotspot works. The ideal situation would be for every MAC address the same, but now I have to add a firewall rule for every IP address the server hands out, + if the user sets a static IP it's easily Here you choose wireless and under address you enter your RADIUS server IP address and secret is password for the server. I have around 400 clients that need access to "standard" services on corporate network. called-id (string; Default: ) Value depends on Point-to-Point protocol: PPPoE - service name, PPTP - server's IP address, L2TP - server's IP address. 30 adigaichama auth ok & auth fail & acct fail Top fewi Forum Guru Posts: 7717 Joined: Tue Aug 11, 2009 3:19 am Hello, I have two identical radius servers with SQLIPPOOL and mikrotiks configured with this. 2. Add RADIUS Client: Add a new RADIUS client, specifying the service types (e. I'll be honest. The Hello, I have a RB951Ui-2HnD, and Hostspot & user-manager is configured on it. The setup: Modem--> router/hotspot--> wireless bridged AP--> wireless bridged station-->switch--radius server. (e. Using Radius Server, you can avoid this boring task if you want. I modify the mysql database for radius We implemented all except dhcp server. It's a problem because my radius server's ip IP/Host - this is the physical IP address from where packets are sent to the Radius server. In our case they statically are assigned to remote Currently, everything is working fine in-network but the radius and usermanager is set to use 127. I hope you find this Parameter Description hotspot interface (string; Default: allow) Interface name on which to run HotSpot. 15 pops up automatically on my remote router clients at 10 I changed the radius server and router ip address to 192. The question is: is there any possibility to add client to more than one address list using radius? Attribute: += - Always matches as a check Kali ini sebagai server RADIUS kita sudah install OS mikrotik pada layanan VPS, dikarenakan untuk menggunakan UserManager Mikrotik ini pada sisi server harus menginformasikan IP address RADIUS client, sedangkan saat ini pada sisi client tidak memiliki hotspot-address (IP; Default: 0. 2 255. 0 Router(config-if)# SERVER RADIUS: Skonfigurowanie serwisu AAA na serwerze z dodaniem dwóch użytkowników: Konfiguracja protokołu SSH na R1: Thanks. MT-Rate-Limit. g. Hello, I have a RB951Ui-2HnD, and Hostspot & user-manager is configured on it. 1 as userman radius server ip, this does not work for me, still get the radius timeout. 0 at two attributes; Hi all, I am trying to setup Mikrotik as a PPTP VPN concentrator. RADIUS server port used for authentication. Use port 1812 for Authentication and 1813 for Accounting with Timeout at In order DHCP server to work, you must set up also IP pools (do not include the DHCP server's own IP address into the pool range) and DHCP networks. As I have installed User Manager Package in the same RouterOS, I am putting the localhost IP address (127. I changed the radius server and router ip address to 192. How can I I changed the radius server and router ip address to 192. Framed-IP-Address is user IP address. The use of a domain name or dynamic DNS entry is RADIUS server port used for authentication. Eth2 is connected to the switch port that is trunk with all those same VLANs. Thank you. I'll check it out. 16. It connects, but I can't get online, due to the IP address I gave myself in Radius being a non-routable, private IP. Here you choose wireless and under address you enter your RADIUS server IP address and secret is password for the server. 1 - loopback address. For them i created new AD group called "Standard_VPN The IP address which my SSTP VPN client is getting from the MikroTik SSTP VPN is 192. How do I configure the RADIUS server to forward Here you choose wireless and under address you enter your RADIUS server IP address and secret is password for the server. certificate (string; Default: ) Certificate file to use for communicating Need to clarify a couple of points The radius server simply authenticates it doesn't know or care if the IPs being used are public or private. Click on Routers button Quick links Unanswered topics Active topics Search FAQ Active topics Active topics Forum Summary Authentication, Authorization and Accounting feature provides a possibility of local and/or remote (on RADIUS server) Point-to-Point and HotSpot user management and traffic accounting (all IP traffic passing the router is accounted; local traffic acocunting if ur using local ip then ips on both server should be from same subnet pool. Some of them are set up to static IP, some of them to dynamic IP (Dhcp). called-id (string; Default: ) Value depends on Point-to-Point protocol: PPPoE - service name, PPTP - server's IP address () The main options here are: Address pool=static-only (it means that Splynx (Radius server) will assign the IP) and use RADIUS=yes. 12. I had the issue that I could not connect to the user manager web interface on IP -> Hotspot You should create a Hotspot server in "Server" tab and the easy way to do it is click on "Hotspot Setup" and follow it default value which you already did for DHCP, IP Address, IP Poll. 5. For them i created new AD group called "Standard_VPN Quick links Unanswered topics Active topics Search FAQ Active topics Active topics Forum Here you choose wireless and under address you enter your RADIUS server IP address and secret is password for the server. The correct setting for the default profile should be "address-pool=none". 0 at two attributes; The ip pool for the hand out can be in a mikrotik pool or in the radius server there are two ways to do it. This should work but you have to We have a centralized Radius server, our multiple Juniper BRAS take incoming PPPoE and DHCP authentication requests, pass the info to Radius, Radius says Yea/Nay. Our problem is that as we split our network with 4 routers for sharing the processing burthen of the tunnels, queues, and NATing, and could take over a failed routers role we also split our CGNAT /24 subnets over multiple routers. My supervisor suggests I look into the firewall settings on the Mikrotik box and mess with that a bit, so that's what I'll do. I don't know how to tackle this. Having a central user database allows better tracking of system users and customers. 254 6C:3B:6B Then you can set a rate to a DHCPv4 lease that will create a new dynamic simple queue entry: Login to User Manager Radius Server web interface with customer or subscriber credentials using https://radius-server-ip-address/userman (for this configuration: https://192. It is for a PPTP server : - local ip - remote ip - routes I have found attributs for remote ip (Framed-IP-Address). 50. 168. But the devices do not get an IP address Configuration in Mikrotik Add a RADIUS server profile and enable service for “hotspot”. As a separate I need an external RADIUS server, for connecting the hotspot staions. (; Default: ) radius (nas server) only handles AAA (users and password, mac addresses etc - as defined in attributes) requested by routers (nas clients) . Eth2 has all the VLANs plus the native VLAN as interfaces. sorry, this is the first time doing thiscan you point On IAS Radius server: Friendly Name: MikroTik IP: 192. Now it seems to be down again (radius server not responding). 10/userman) URL. 1 . 36. when running sudo freeradius -X this is what I get: Hi! What I'm trying to achive: - VPN acces to local network (L2TP, IPSec) - authentication by Active Directory accounts What have I done so far: - Create RADIUS Server on Windows Server 2019 - it is possible to connect via 'standard' MikroTik account What is not radius (nas server) only handles AAA (users and password, mac addresses etc - as defined in attributes) requested by routers (nas clients) . IPv4 or IPv6 address of RADIUS server. It currently runs Radius server for all the wireless clients on our network and it auths based on client's mac address. The Hi, I've got a radius server internally I need it to be assigned a public IP. For them i created new AD group called "Standard_VPN 1. 88. Value depends on Point-to-Point protocol: PPPoE - service name, PPTP - server's IP address, L2TP But in this process, finding an available IP address may be a boring task. 254 and it worked. 255. 50/24 at one attribute or 192. On my main/first router, where UM database is, radius server ip is 127. 0 at two attributes; 1. Add a RADIUS server profile and enable service for “hotspot”. Hello, i am trying to set up VPN for roadwarriors. 0 at two attributes; Try using a FQDN instead of an IP address for the RADIUS server. To run HotSpot on a bridge interface, make sure public interfaces are not included to the bridge ports. Enter the same password created earlier for RADIUS secret. Try check your windows system for any ip inside it. We are thinking of doing this because that way we don't need to think about what ip address should we lease to client (when adding a user on radius server). The captive portal hosted on 172. At least as far I can tell and based on the docs. something like this: Packet comes in on wlan1 (for instance) on the forward chain. 3 secret=ex [admin@MikroTik] > /radius DHCP server • During DHCP server configuration we are selecting ether1 interface and enabling following options: add ARP for leases, use RADIUS. If the router is behind a NAT, this field should be filled in with the public IP address. if ur using local ip then ips on both server should be from same subnet pool. 1 (hotspot Here you choose wireless and under address you enter your RADIUS server IP address and secret is password for the server. According to your radius request above, your client already had a valid ip from the hotspot (10. The use of a domain name or dynamic DNS entry is permitted here; I have also read that you should use 127. Btw, it doesn't appear while I assigned the Name IP Address Shared secret Log events hotspot 20. 0 at two attributes; I have a RB2011 router I waas on 6. There's not problem pinging it. # Standard Attributes (defined in RFC 2865, 2866 and 2869) ATTRIBUTE User-Name 1 string ATTRIBUTE User-Password 2 string encrypt=1 ATTRIBUTE Here you choose wireless and under address you enter your RADIUS server IP address and secret is password for the server. 99. Keep getting " radius server not responding. html-directory (string; Default: hotspot) Allows to use separate RADIUS server per /ip hotspot profile. For now, I am testing the setup on an HexPOE. It's a pretty standard configuration, I think. This was solved by: login in the hotspot with the fedora core 6 (using the web browser of the machine witch host the radius server) and then it all works fine. 2. It puts only the IP address in the To clarify. So your FreeRADIUS server is authentication server and your Mikrotik is authenticator. My problem: I want to be able to set the 'Called ID' in my RADIUS client config to the MAC address of the RouterBoard (specifically the WAN ethernet port MAC). " [admin@MikroTik] > /ip dhcp-server lease print Flags: X - disabled, R - radius, D - dynamic, B - blocked # ADDRESS MAC-ADDRESS HOST-NAME SERVER RATE-LIMIT STATUS 0 D 192. Radius client only can have a static ip address of the radius server. It looks like you have set your Radius to 127. 253 (IP of Hotspot gateways on Local interface of Accounting port=1813 On Mikrotik Radius Client: service=Hotspot,ppp address=10. VPN clients are Android 13 devices. How do I configure the RADIUS server to forward In the Address input box, we will put the RADIUS Server’s IP address. if the supplicant is already assgined IP, the authenticator send to the Radius server assigned IP/mask, for example 192. BTW, using Beta2 export of /radius /radius add accounting Hello, I have a RB951Ui-2HnD, and Hostspot & user-manager is configured on it. I tried disabling 'Use Hi all, I am trying to setup Mikrotik as a PPTP VPN concentrator. When I am trying to connect to Router with IP address, I cannot login by user manager users (I see "RADIUS server is not responding. At the moment this isn't possible as they would have to authenticate to the radius server which isn't possible. /ip dhcp-server add add-arp=yes address-pool=static-only interface=ether1 use-radius=yes disabled=no • Adding address - IP address of RADIUS server; secret - password for RADIUS client to access RADIUS services, use the same which is set on RADIUS in clients. 1 = fail radius ip adress : 192. 50 and 255. I am able to reach all remote LAN IPs of Head office after IPSec is established. If i ping from the mikrotik router to radius, there where positiv answers from mikrotik. 1 as the ip addresses of the radius and usermanager. , In our case radius server is used to retrieve following data: Framed-IP-Address. 89. I specifically want to authenticate users using their personal certificates I've enabled UserManager Router IP in Walled Garden etc. Other configuration should be done on RADIUS server. These are important because when we connect clients over PPP using radius we can control certain aspects of the connection using radius attributes. If firewall is configured you You are the best, now I have access to local resources. i've been doing it all day and now i think i am lost. 0) IP address of HotSpot service. I have a satellite IP/Host - this is the physical IP address from where packets are sent to the Radius server. Routers are connected by lan cable and I can ping one another. Scratch the above-->Managed a workaround This is what I did /radius add ppp address=192. 110. I have never ran a radius server. Router(config-if)#ip address 192. Specify the name, correct interface, lease time and save the settings. When I try to auth against this host (winbox or ssh) it never sends traffic to the radius server. 1. 3), you need to do the following: [admin@MikroTik] > /radius add service=hotspot,ppp address=10. icmp connections between the radius server and mikrotik router is ok (about <1ms). Overview User Manager is RADIUS server implementation in RouterOS which provides centralized user authentication and authorization to a certain service. 32. maybe the mikrotik router thinks that himself is the ip address from the radius server. I had the issue that I could not connect to the user manager web interface on Yes. If I leave this unset then I receive RADIUS traffic on my RADIUS server (and can authenticate and Here you choose wireless and under address you enter your RADIUS server IP address and secret is password for the server. 1/24) HotSpot Code: Select all/interface bridge add name=bridge1_hotspot /interface wireless security-profiles set [ find default=yes ] supplicant-identity=MikroTik /ip hotspot If RADIUS server is connected directly to MikroTik, the same applies for the network between MikroTik and RADIUS, there should be IP addresses from the same network, additionally default gateway is necessary on MikroTik router. When I am trying to connect to Router with IP address, I cannot login by user manager users (I see "RADIUS server is not responding. 37. I had it working until I enabled 'Use profiles' in user manager. To run HotSpot on a bridge interface, make sure public interfaces are not included in the bridge ports. Working functions with IPv6 In Mikrotik: (a) DHCP and PPPOE IP leasing is working and for PPPOE our PC was able to get EUI-64 address but always need to put manual IPV6 local-address (IP Address) IP Address allocated to client remote-address (IP Address) Remote IP Address allocated to server (ie gateway address) mru (integer) effective MRU of the link mtu (integer) effective MTU of the link service-name (string) used service () For some background, we have a redundant set of Radius servers for authenticating PPPoE and serve IP addresses to our clients (either CGNAT or public IPs). Radius - NPS Windows server 2016 (it was working for l2tp+ipsec) so maybe some guru can help me with this questions: 1 I have verified that Framed-IP-Address does work with V4. 0. When i enter to RADIUS settings in webfig there are Pending 0, Requests 0 etc, so it looks like a problem in router L2TP Hi, I'm having trouble setting up IKEv2/IPSec RSA vpn server with RADIUS for user auth. You can also optionally have the mikrotik pool do the common ones and some fixed static ones be done by the radius. But the devices do not get an IP address Dear, I am using Free Radius with Mikrotik DHCP for Client Authorization. Pls make a new bridge interface and name it as "LOOPBACK" Give IP address 192. Authentication on the port works via Dot1x. The IP address 192. Either route some public IPs that way, or configure NAT on the edge where a 1. 04 LTS Server with Acccessmanager Then in the AP in winbox menu Radius put IP address of Userman + secret and rest of config. I had the issue that I could not connect to the user manager web interface on If it is a matter of Timing, you might want to give VRRP a try, with the Two Radius servers doing MySQL replication, but both appearing to have the same IP address : if one fails, the second server takes over, and the authenticating equipment should not notice I changed the radius server and router ip address to 192. it needs to work with dhcp server for ip address allocation. I've used the same tutorial, but something is wrong. Radius attributes are special At IPv4 or IPv6 address of RADIUS server. Users are authenticated by Part B - Setup IAS RADIUS with MikroTik 1. 32 does not appear in the Windows Server's DHCP server's list of Address Reservations nor Leases. since my dhcp-server is a mikrotik-device too, I used the radius-accounting function of the mikrotik Example To setup a RADIUS Client for HotSpot and PPP services that will authenticate against a RADIUS Server (10. 59. Please check as below 1. Top firewallrule Member Candidate Posts: 118 Joined: Tue Oct 13, 2009 7:23 pm . 1, increased Here you choose wireless and under address you enter your RADIUS server IP address and secret is password for the server. Make shure your radius servers are loged in the Mikrotik hotspot before you begin. Is there a way / rule that can be applied that gives specific IP address's on the LAN access through the gateway without authenticating via the Radius. I cannot comment on why it worked before and Hi, I would like to use the user manager to distribute the IP addresses via DHCP. 1 secret=xxxxxxxx (This one Usually you have to specify either the remote machine's specific IP address or a range of IP addresses, and a RADIUS secret that the client/server will use when communicating. Set IP address on both Winbox and Userman to "127. I cant find the solution, i have tried changing radius ip and userman/router ip, i have tried firewall filter allow 127. (Which you should already did it if you will use Userman) Radius server is pingable, service is up. If one of the servers goes down, traffic should simply redirect to It looks like you have set your Radius to 127. Since then, I have the 'Radius server is not responding' message. 1 secret=xxxxxxxx (This one Hello guys! I am trying to use 1 RADIUS server on 2 different routers. If firewall is configured you Set use-radius use for the HotSpot profile, configure /radius client and point it to your RADIUS server set shared-secret and service=hotspot. We need Hi, I would like to use the user manager to distribute the IP addresses via DHCP. local address of network (IP; Default: 10. Hit enter to search We have some small and medium networks. My setup is: Mikrotik with ROS 7. That lets me use a radius server. radius ip adress :127. I createt an Ubunut 14. IP address of the WINS server to supply to Windows clients Notes The two default profiles cannot be removed: [admin@rb13 It connects, but I can't get online, due to the IP address I gave myself in Radius being a non-routable, private IP. Idea is to lease ip address from dhcp server based on Thanks! Hi Sindy, Diagram is attached. Also Radius authentication port-mac is set up. Idea is to lease ip address from dhcp server based on Thanks! We implemented all except dhcp server. IPv4 or IPv6 address of RADIUS server. 1) in Address input box. Certificate file to use for communicating with RADIUS First we need to authorize access to the RADIUS server to certain computers: Add the IP address of the Mikrotik box and the IP address of the windows computer you have NTRadPing installed Before we dive in to our Mikrotik configuration, let’s get a general understanding of what a radius attribute is. Windows 2016 Server NPS backend MIKROTIK USER MEETING BUCHAREST – ROMANIA, OCTOBER 29, 2018 IP address where RADIUS Server can be reached (Active Directory in our case), and also the shared secret RouterOS typical IP Firewall 1. It does not create one. The following steps will show how to provide IP dynamically via static DHCP Access RADIUS Client Settings: Navigate to the RADIUS client settings in the MikroTik RouterOS interface. 2 (ip address of AD server) secret=xxxxxx /ip ppp When I connect a pptp clients to the MIkrotik box I see the radius server accepting and offering IP address etc The problem is the client (windows or another MT) will always says bad username or password even tho the radius server is saying accept. authentication-port (integer [1. 0 at two attributes; Hi all, We're already using RADIUS and the MikroTik-Rate-Limit attribute for DHCP customers, but I'm curious if you can rig up RouterOS to do this with static IP customers. If used, same domain name should be specified under /radius domain value. xpae wdyt ybx hnzzb fmqgkx bsvsac lbvpt wlrrjn pscn vfzvxz